Practical approaches to the application of hygienic criteria for substances that do not need to establish hygienic standards in the air of the working area
https://doi.org/10.31089/1026-9428-2022-62-11-755-760
Abstract
Introduction. When new industrial enterprises appear, whose activities are related to the use and/or production of chemicals, pollutants that do not have approved hygiene standards may appear in the air of the working area. We note that the introduction of new chemicals into the production process does not always require the development of a hygienic standard in the air of the working area, since conditions can be met for these compounds, namely compliance with hygienic criteria, under which the development and approval of hygienic standards is not required.
The study aims to demonstrate a practical approach to the application of hygienic criteria for substances that do not need to establish hygienic standards in the air of the working area on the example of paraformaldehyde.
Materials and methods. The theoretical basis of the work was the methods of substantiating the need to develop hygienic standards: maximum permissible concentration (MPC) and approximate safe level of exposure (ASLE) to harmful substances in the air of the working area. The practical basis of the work was methodological guidelines for measuring mass concentrations of formaldehyde in the air of the working area by a photometric method based on the reaction of formaldehyde with acetylacetone in an ammonium acetic acid medium and subsequent photometric measurement of the optical density of the yellow-colored reaction product.
Results. The conducted experiment simulating the processes of formaldehyde emission from paraformaldehyde in various production conditions showed that paraformaldehyde under the influence of temperature releases formaldehyde, while the rate of formaldehyde release increases with increasing temperature.
Conclusion. Analysis of the technology of production (application) of paraformaldehyde, toxicological data, as well as an experiment modeling the processes of formaldehyde emission from paraformaldehyde in various production conditions allows us to conclude that the development of a hygienic standard for paraformaldehyde in the air of the working area is impractical, according to paragraph 2.1.1. GN 1.1.701-98 "For substances containing the ingress of which into the air of the working area in the form of vapors and aerosols or a mixture thereof is excluded due to the physico-chemical properties, as well as production and application conditions" and p.2.1.3. GN 1.1.701-98 "For substances that easily hydrolyze in the air with the formation of hydrolysis products, the toxicity of which has been studied and the hygienic standards of which have been established".
Contribution:
Fedotova L.A. — data collection and processing, text writing, editing;
Potapchenko T.D. — data collection and processing, text writing;
Mamonov R.A. — editing.
Funding. The study had no funding.
Conflict of interests. The authors declare no conflict of interests.
Received: 09.11.2022 / Accepted: 18.11.2022 / Published: 12.12.2022
About the Authors
Lionella A. FedotovaRussian Federation
Senior Researcher, Centre for Strategic Planning and Management of Biomedical Health Risks of Federal Medical Biological Agency, Moscow, Cand. of Sci. (Med.).
e-mail: LFedotova@cspfmba.ru
Timur D. Potapchenko
Russian Federation
Roman A. Mamonov
Russian Federation
References
1. CAMEO Chemicals. Record Name: PARAFORMALDEHYDE. https://cameochemicals.noaa.gov/chemical/4156
2. The NIOSH Pocket Guide to Chemical Hazards is intended as a source of general industrial hygiene information on several hundred chemicals/classes for workers, employers, and occupational health professionals. Read more: https://www.cdc.gov/niosh/npg/
3. IARC. Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans. Geneva: World Health Organization, International Agency for Research on Cancer, 1972-PRESENT. (Multivolume work). http://monographs.iarc.fr/ENG/Classification/index.php
4. Yates J. Adsorption and decomposition of formaldehyde on tungsten (100) and (111) crystal planes. Journal of Catalysis. 1973; 30(2): 260. http://dx.doi.org/10.1016/0021-9517(73)90073-0
5. American Conference of Governmental Industrial Hygienists. Documentation of the TLV’s and BEI’s with Other Worldwide Occupational Exposure Values. CD-ROM Cincinnati, OH 45240-1634 2005.
6. Lewis R.J. Sr. (ed) Sax’s Dangerous Properties of Industrial Materials. 11th Edition. Wiley-Interscience, Wiley & Sons, Inc. Hoboken, NJ. 2004.
7. Tomlin CDS, ed. Formaldehyde (50-00-0). In: The e-Pesticide Manual, 13th Edition Version 3.2 (2005-06). Surrey, UK, British Crop Protection Council.
8. GOST 12.1.007-76. «The system of occupational safety standards. Harmful substances. Classification and general safety requirements» (in Russian).
9. SanPiN 1.2.3685-21 «Hygienic standards and requirements for ensuring the safety and (or) harmlessness of environmental factors for humans» (in Russian).
10. GN 1.1.701-98. «Hygienic criteria for substantiating the need to develop MPC and the elimination (ODE) of harmful substances in the air of the working area, the atmospheric air of populated areas, water of water bodies.» Ministry of Health of Russia. M.; 1998 (in Russian).
Review
For citations:
Fedotova L.A., Potapchenko T.D., Mamonov R.A. Practical approaches to the application of hygienic criteria for substances that do not need to establish hygienic standards in the air of the working area. Russian Journal of Occupational Health and Industrial Ecology. 2022;62(11):755-760. (In Russ.) https://doi.org/10.31089/1026-9428-2022-62-11-755-760